Fault-Tracing Information

Fault-tracing

Replacing a component
The component has registered an internal fault.
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent problem may be due to interference at start of the component or may be another type of problem that can return at different times. The fault is evaluated depending on how it occurs.
In the event of a permanent fault, download new software to the Closing velocity module (CVM).
If the problem remains after software download, try replacing the Closing velocity module (CVM).
Remedy as necessary.

Location Of Components:

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

FAULT FOUND - DONE

Attempt New Test - Replacing a component

-------------------------------------------------