Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-U300045

Condition
Forward Sensing Module (FSM) checks the software in the control module.
The diagnostic trouble code is stored if the control module detects:
- Internal components do not work.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source

- Faulty software.

Fault symptom[s]
- Brake pedal/Excessive "brake pedal effort" required
- Cruise control/Does not engage
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Warning lights and chimes/Bulb failure indication/no indication
- Text window and warning symbol/Text message
- Warning lights and chimes/Front monitoring/Active safety indication/no indication