Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAM-U014000

Condition
The Parking Assistance Module (PAM) is continuously supplied with necessary information from the Central electronic module (CEM) via controller area network (CAN) communication. The Parking Assistance Module (PAM) checks the communication with the Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- No communication with the Central electronic module (CEM).
- Incorrect value runs longer than 10 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Parking Assistance System, malfunction
- Information lamp is on
- Message in information display