Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-U014000

Condition
The Keyless vehicle module (KVM) is continuously supplied with necessary information from the Central electronic module (CEM) via CAN communication. Keyless vehicle module (KVM) checks communication with Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- No communication with the Central electronic module (CEM).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Locking/unlocking/Central locking does not work