Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-P273300

Condition
The driving part of the transmission (clutch C1) is disengaged when the following conditions are fulfilled:
- The vehicle is stationary.
- The engine is idling.
- The brake pedal depressed.
- Gear selector is in position D.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Transmission does not have drive in gear 1, 2, 3, or 4.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Normal driving.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Auxiliary program Emergency mode 2 in the transmission control module (TCM) has started.

Hint: Emergency mode in case of malfunction, B6304T4, TF-80SC AWD, B5254T5, TF-80SC Emergency Mode In Case of Malfunction

Possible source
- Solenoid SLC1 has jammed.
- Mechanical fault in the transmission.

Fault symptom[s]
- Text window and warning symbol/Yellow symbol and text message
- Warning lights and chimes/Malfunction Indicator Light ("Check engine" light) indication/no indication
- Automatic transmission/No automatic gearshift
- Automatic transmission/No manual gear shift
- Automatic transmission/Lockup does not work
- Automatic transmission/Shifts rough or jerky/Unsure when/at all times
- Driving/Poor performance/lacks power