Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P240C00

Condition




The engine control module (ECM) checks the control signal to the heating element in the leakage diagnosis pump.
The diagnostic trouble code is generated if the control module registers a fault in the control signal.
The diagnostic trouble code can be diagnosed when the ignition is on.

Substitute value
- Nothing.

Possible source
- The signal cable is short-circuited to supply voltage
- Open circuit on signal cable.
- Damage leakage diagnosis pump.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.