Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P117068

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

Engine Control Module (ECM) monitors the front heated oxygen sensor (bank 1). If the control module detects that the heated oxygen sensor value is below or above a certain level for a certain time, the diagnostic trouble code is generated.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.

Substitute value
- Nothing.

Possible source
- This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.

Fault symptom[s]
- None.