Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-P093011

Condition




The gear selector module (GSM) is located at the rear edge of the gear shift assembly's left side. The Gear selector module (GSM) communicates with the Transmission control module (TCM) via an internal network, Local Interconnect Network (LIN), to activate the shift-lock function among other things.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Too great a current through the shift lock solenoid when the output on the solenoid's diver stage is active.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- Gear selector blocked.

Possible source
- Short-circuit to ground in the signal cable.
- Shift-lock solenoid does not work.
- Internal fault in gear selector module (GSM).

Fault symptom[s]
- Gear selector/Difficult/impossible to change gears
- Text window and warning symbol/Yellow symbol and text message