Fault-Tracing Information

Fault-tracing

Checking the connectors and wiring




- Ignition off.
Check connector and pins on pressure reducing valve for damage, short-circuiting to voltage feed, or oxidation. In case of damage, change pressure reducing valve and Differential electronic module (DEM) as a unit.
Remedy as necessary.

Other information
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

FAULT-TRACING FAILED - No Fault Found

Attempt New Test - Checking the connectors and wiring

-------------------------------------------------