Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P073768

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

Transmission control module (TCM) can request increased rpm before a downshift. Request is sent to engine control module (ECM) via the CAN-network.
If engine control module (ECM) for some reason does not allow this rpm increase, e.g., vehicle speed too low, the diagnostic trouble code is generated.
The diagnostic trouble code is only an information code, confirming that engine control module (ECM) has denied requested rpm increase.

Substitute value
- Nothing.

Possible source
- None.

Fault symptom[s]
- Poor gear shifting quality