Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DEM-P060254

Condition
The differential electronic module (DEM) checks the software calibration. The control module has a number of parameters that can be calibrated. The parameters must have a default value. The parameters value is checked internally in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The default values are missing or incorrect.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module is calibrated together with the control valve/the axial solenoid during production. This cannot be carried out on the after market.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value

- Four wheel drive is disengaged.

Possible source

- Damaged Differential Electronic Module (DEM).

Fault symptom[s]
- 4-wheel/all wheel drive/Does not work
- Text window and warning symbol/Text message