Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-P060000

Condition
There are power stages for controlling the solenoids in the Transmission control module (TCM). One of these power stages is used to control the linear solenoids.

The diagnostic trouble code (DTC) is stored if the control module detects that:
- The power stage has an internal fault.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Auxiliary program Emergency mode 1 in the transmission control module (TCM) has started.

Hint: Emergency mode in case of malfunction, B6304T4, TF-80SC AWD, B5254T5, TF-80SC Emergency Mode In Case of Malfunction

Possible source
- Internal fault in the transmission control module (TCM).

Fault symptom[s]
- Warning lights and chimes/Malfunction Indicator Light ("Check engine" light) indication/no indication
- Text window and warning symbol/Yellow symbol and text message
- Automatic transmission/No automatic gearshift
- Automatic transmission/No manual gear shift
- Automatic transmission/Shifts rough or jerky/Unsure when/at all times
- Automatic transmission/Gear changes take too long to complete/Unsure when/at all times
- Driving/Poor performance/lacks power
- Automatic transmission/Lockup does not work