Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DIM-C200262

Condition
The Driver information module (DIM) calculates the total distance based on the information from several other control modules in the vehicle. The Driver information module (DIM) checks the quality of the information.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Some of the signals are marked as invalid.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Internal fault in another control module in the same part of the control area network (CAN).

Fault symptom[s]
- Trip odometer gives no reading