Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SAS-C1B0092

Condition




The Steering wheel angle sensor module (SAS) is located in the lever module together with the steering wheel module (SWM) and is supplied with power by it. Only the steering wheel angle sensor module (SAS) communicates on the controller area network (CAN). There are two magnetic sensors that read off the steering wheel's position.
A diagnostic trouble code (DTC) is stored if the control module detects:
The diagnostic trouble code (DTC) is stored if the control module detects that:
- One of the magnetic sensors gives an unreasonable value.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- The control module transmits a message to other nodes on the CAN network that its information is incorrect.

Possible source
- Damaged steering wheel angle sensor.

Fault symptom[s]
- Text window and warning symbol/Yellow symbol and text message
- Warning lights and chimes/Antispin/antiskid (DSA, TRACS, STC, DSTC) indication/no indication
- Anti-spin function/Does not work
- Stability function/Does not work
- Active chassis function/Does not work