Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-C110801

Condition
Brake control module (BCM) feeds voltage to the pedal position sensor, vacuum sensor and the internal brake pressure sensor with 5 V.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect voltage to the sensors.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Traction control (TC) blocked.
- Stability control (SC) blocked.
- Active yaw control (AYC) is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- Short-circuit to supply voltage in the cable.
- Short-circuit to ground in the cable.

Fault symptom[s]
- Anti-spin warning lamp lit
- Traction control not working
- Stability function is not working
- Anti skid function is not working