Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-C100198

Condition
The control modules checks internal components in the system.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The camera's temperature is higher than 85 °C.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on for at least 30 seconds.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The camera temperature is higher than reliable level.
- In rare cases, a temporary light beam into the camera cause incorrect saving of the trouble code. No action is necessary.

Fault symptom[s]
- Warning lights and chimes/Bulb failure indication/no indication
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Brake pedal/Excessive "brake pedal effort" required
- Text window and warning symbol/Text message
- Front monitoring/Active safety/Driver Alert Control does not work
- Front monitoring/Active safety/Lane Departure Warning does not work