Fault-Tracing Information

Fault-tracing

Fault-tracing information
A cause of failed calibration may be that the camera is not installed correctly.
Check that the camera is correctly installed as follows:
Camera collision warning Camera Collision Warning
When the camera is installed correctly, perform a new calibration of the camera.

Other information
- Calibration of radar and camera Calibration of Radar and Camera





Continue - Information

-------------------------------------------------

Information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Fault-tracing information

-------------------------------------------------