Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-C100192

Condition
The forward-sensing module (FSM) checks information from the forward-sensing camera.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The calibration procedure for the camera has not been able to complete the entire calibration.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- 5-10 minutes driving at least at 30 km/h, with visible road markings on both sides.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Calibration of the camera failed.

Fault symptom[s]
- Text window and warning symbol/Text message
- Warning lights and chimes/Bulb failure indication/no indication
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Brake pedal/Excessive "brake pedal effort" required
- Front monitoring/Active safety/Driver Alert Control does not work
- Front monitoring/Active safety/Lane Departure Warning does not work