Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-C006B00

Condition
The Brake control module (BCM) continually checks the system's functions.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The stability function regulates without an open-circuit for longer than 15 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Stability function activated.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Traction control (TC) blocked.
- Stability control (SC) blocked.
- Active yaw control (AYC) is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- Faulty wheel alignment.
- Loose or incorrectly installed body sensor cluster stability sensor (BSC).
- Body sensor cluster (BSC) is not functioning.

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- Anti-spin warning lamp lit
- Traction control not working
- Stability function is not working
- Anti skid function is not working
- Adaptive cruise control; No Functionality
- Collision avoidance driver support; No Functionality
- Front monitoring/Active safety/City Safety does not work