Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-C006368

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information. No fault-tracing has been developed for this diagnostic trouble code (DTC).

The Supplemental restraint system module (SRS) checks internal components in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Sensor temporarily overloaded, e.g., due to driving situation and/or behavior.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None

Possible source
- Non-repairable fault. Only erasing of trouble code is required.

Fault symptom[s]
- None.