Fault-Tracing Information

Internal fault

Checking the installation
Incorrectly installed control module.
Remedy as necessary.





Was a fault detected?

Yes - Fault-tracing information

No - Internal fault

-------------------------------------------------

Internal fault
The Park Brake Module (PBM) has registered an internal error.
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent malfunctions can be caused by interference at start up of the Park Brake Module (PBM) or may be a different type of malfunction which occurs on different occasions. The fault is evaluated depending on how it occurs. If the problem returns, replace Park Brake Module (PBM).
In the event of a permanent error, replace the Park Brake Module (PBM).
Remedy as necessary.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the installation

-------------------------------------------------