Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAM-B1B4096

Condition
The Parking Assistance Module (PAM) checks internal components in the parking sensor, outer, left front.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Internal components do not work.
- Incorrect value runs longer than 1 second.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Parking sensor poor contact.
- Open-circuit in the ground lead.
- Contact resistance or oxidation in the terminals.
- Damaged parking sensor.

Fault symptom[s]
- Parking Assistance System, malfunction
- Information lamp is on
- Message in information display