Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The power windows are provided with Hall sensors that measure the rotation speed for each power window and thus determines window position.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from the Hall sensor is incorrect.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Moving the window.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- The control module blocks automatic window operation.

Possible source
- Short-circuit to supply voltage in the signal cable.
- The signal cable is short-circuited to ground.
- Open circuit on signal cable.
- Contact resistance, oxidation or poor contact in connections.
- Damaged hall sensor.

Fault symptom[s]
- Electrical operated window/No/reduced/incorrect function