Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The Passenger door module (PDM) powers the heating loop for defrosting the door mirror.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The current strength is too low on the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Activation of defroster.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable for the defroster in the door mirror.
- Open circuit on signal cable.
- Contact resistance, oxidation or poor contact in connections.

Fault symptom[s]
- Defog/defrost/Door mirrors defog/defrost/Does not work