Fault-Tracing Information

Fault-tracing

Checking side view camera
Troubleshoot connector #C3 on Parking Assistance Camera (PAC) for loose connection or oxidation.
Troubleshoot cable to the side view camera for open circuit or short-circuit.
Troubleshoot connector side view camera for loose connection or oxidation.
Check-measure #C3-1 on Parking Assistance Camera (PAC). The value shall be approx. 12 V.
If no faults are found, take action in the following order:
Try with changing side view camera.
If that does not help, replace the parking assistance camera module (PAC).

Other information:
- Signal specification Signal Specification, Parking Assistance Camera (PAC)
- Parking Aid Camera Module Parking Aid Camera Module





Continue - Verification

-------------------------------------------------

Verification




Verification
Access to the vehicle is necessary for the following checks.
- Activate parking camera in the menu.
- Check that the side view camera is activated in the menu.
- Activate distance information in the menu.
- Ignition position II or engine running.
Check that:
- An image of what is on the left-hand side of the vehicle is shown on the front display screen.

Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Information

VERIFIED - FAULT FOUND

-------------------------------------------------

Information

Attempt New Test - Checking side view camera

-------------------------------------------------