Diagnostic Trouble Code Information

Diagnostic trouble code (DTC) information KVM-B11C424

Condition
The Keyless vehicle module (KVM) checks the signal from the lock button on the boot lid.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Lock button has been activated for longer than 2 minutes.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activation of the lock button.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Damaged lock button.
- The signal cable is short-circuited to ground.
- Lock button depressed for longer than 2 minutes.

Fault symptom[s]
- Locking/unlocking/Central locking does not work