Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PHM-B116C09

Condition




The Phone module (PHM) registers the signal from the external SIM card holder.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- No signal from the external SIM card holder obtained.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Request from mechanic.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Contact resistance, oxidation or open-circuit in the terminals.
- Faulty SIM card reader.
- Incorrect SIM-card holder.

Fault symptom[s]
- Cellular phone/Other cellular phone problems
- Cellular phone/SIM card not accepted
- Cellular phone/PIN code not accepted
- Cellular phone/Does not work