Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The Passenger door module (PDM) supplies voltage to the central lock motor in the passenger door.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The current strength is too high on the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Activation of central lock.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Function for folding and power adjustment of door mirrors blocked to prevent unintentional locking of the vehicle.

Possible source
- Short-circuit to ground in the power supply cable.
- Moisture and/or oxidation in terminals.

Fault symptom[s]
- Locking/unlocking/Central locking does not work
- Door mirrors/Electrical adjustment does not work
- Door mirrors/Folding does not work