Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-B10FF68

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

The Engine Control Module (ECM) monitors the engine's ignition. If the control module detects that ignition is outside the limit values for a certain time when the engine is running, the diagnostic trouble code is generated.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.

Substitute value
- Fuel shut-off in the event of an active fault.

Possible source
- This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.

Fault symptom[s]
- Jerky running
- Message in information display