Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B10C014

Condition
Central electronic module (CEM) monitors the voltage feed to the fuel pump and also monitors the voltage on the cable.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Short-circuit to ground in the power supply cable.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Activation of the fuel pump.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the power supply cable.
- Damaged fuse.

Fault symptom[s]
- Engine fails to start