Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-B10A268

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

Engine control module (ECM) registers internally if the vehicle has been involved in a collision. If the control module detects that Central electronic module (CEM) sends internal signals that a collision has occurred, the diagnostic trouble code is generated.

Note! The diagnostic trouble code must be erased like a normal diagnostic trouble code, even if fault-tracing is not carried out.

The diagnostic trouble code (DTC) can be diagnosed at key position II.

Substitute value
- Nothing.

Possible source
- This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.

Fault symptom[s]
- Engine is difficult to start
- Malfunction indicator light (MIL), on
- Message in information display