Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B102694

Condition
The steering column lock is checked by the steering column lock module (SCL). Central electronic module (CEM) is responsible for voltage feed to Steering column lock module (SCL).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Messages are received from Steering column lock module (SCL) when the unit shall not be supplied with voltage.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- All ignition positions.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the power supply cable to the steering column lock module (SCL)

Fault symptom[s]
- Starter motor does not operate
- Message in information display