Fault-Tracing Information

Fault-tracing

Select an alternative
- If the diagnostic trouble code (DTC) is permanent: Select alternative 1.
- If the diagnostic trouble code (DTC) is intermittent: Select alternative 2.

Select an alternative.

1 - Checking components and connections

2 - Intermittent fault

-------------------------------------------------

Intermittent fault




- The fault has been remedied.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Select an alternative

-------------------------------------------------

Checking components and connections




- Ignition off, wait for 15 seconds.
The control module has registered an internal fault in the software.
- Download new software to the supplemental restraint system module (SRS).
If the fault persists after reprogramming the supplemental restraint system module (SRS):
- Download new software to the central electronic module (CEM).
Remedy as necessary.

Other information

Continue - Fault-tracing information

-------------------------------------------------