Component Tests and General Diagnostics

Checking global opening/closing of windows.

Fault-tracing information
All windows can be opened simultaneously - this is a passenger environment function. This is done by holding down the unlock button on the remote control for 3 seconds. In the same way, all windows plus the sunroof can be closed simultaneously. This is done by holding down the lock button on the remote control for 2 seconds.
This function can be programmed according to customer requirements.

Program the function?

Yes - Programming of global opening/closing of windows

No - DONE

-------------------------------------------------

Programming of global opening/closing of windows





There are four programming positions to choose from:
- Global opening not activated, global closing activated.
- Global opening not activated, global closing not activated.
- Global opening activated, global closing activated.
- Global opening activated, global closing not activated.

Proceed as follows:
- Ignition on
- Click on the symbol for VCT2000 to start programming.
- Select one of the above alternatives.

Check that programming has been successful:
- Ignition off
- Remove the ignition key.
- Try to close and open all windows using the remote control.





Continue - DONE

-------------------------------------------------