Stabilizer Link: Service and Repair

Rear Stabilizer Bar Link

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Note! If the vehicle is equipped with anti-roll bar links that have ball joints, see: Rear Stabilizer Bar Link.

Removal






Remove:
- the nut
- the screw with the bushings.

Installation

Note! For tightening torques, see: Tightening torque [1][2]Specifications.

Installing the anti-roll bar link

Install:
- the screw with the bushings
- the nut, tighten according to: Tightening torque [1][2]Specifications.