Brake Light Switch: Testing and Inspection

Checking installation, brake light switch, and brake pedal position switch

Checking installation, brake light switch, and brake pedal position switch
This symptom troubleshooting only applies to vehicles that show any or some of the following symptoms:
- Tail light/Brake light does not work
- Cruise control/Does not engage
The problem may be due to the brake light switch or the brake pedal position switch being installed incorrectly.
Often the contact is not damaged, instead it is only installed incorrectly.
Disconnect the contact and check by installing it again.

Other information:
- Stoplamp switch Service and Repair

Continue - DONE

-------------------------------------------------