Description of Parameters

Description of parameters

Parameters, status

Media player status
Displays current status of the media player:
- Play
- Stop
- Pause
- Load
- Eject
- Search forward (sound on)
- Search backward (sound on)
- Fast backward by time (mute)
- Fast forward by time (mute)
- Retract
- Empty
The parameter can be read when the media player is selected as the source.

Active Disc
Displays which disc is selected in the CD changer.
The parameter can be read when the vehicle is equipped with CD changer and this is selected as the source.

Frequency band AM/FM
Displays which frequency band, AM or FM, is selected.
The parameter can be read when the radio is selected as the source.

Antenna selection
Displays which antenna, main antenna or subantenna, is in use.
The parameter can be read when the radio is selected as the source.

Region
Displays the region for which the antenna is configured.
EU=Europe
USA=USA
AUS=Australia
JPN=Japan

Parameters, value

Track
Displays the current track on the CD disc.
The parameter can be read when the media player is selected as the source.

Frequency
Displays which frequency is set.
The parameter can be read when the radio is selected as the source.

Signal strength
Obtaining radio signal strength readings.
The value read applies to the active antenna. The signal strength is presented as a figure between 0 and 255. The figure 0 means that no signal has been registered. The figure 255 means that the highest possible signal strength has been registered.
The parameter can be read when the radio is selected as the source.

Noise level
Reading the radio signal noise level.
The value read applies to the active antenna. The noise level is presented as a figure between 0 and 15. The figure 0 means that no noise has been registered. The figure 15 means that the highest noise level that can be registered has been reached.
The parameter can be read when the radio FM band is selected as the source.