Connecting the Breakout Box, Driver Information Module (DIM)

Connecting the breakout box

Special tools:
951 2901 DIM/ICM adapter 951 2901 DIM/ICM Adapter
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable
981 3190 Replaced by 9511428 981 3190 Replaced By 9511428

Connecting the breakout box




- Ignition off
- Remove the fuse
- Disconnect the driver information module (DIM). See Combined instrument panel Combined Instrument Panel
- Disconnect the control module connector.
Connect adapter 951 2901 DIM/ICM adapter 951 2901 DIM/ICM Adapter to the control module connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box and wiring 951 1499 Cable 951 1499 Cable to the adapter.
Alternatively, breakout box 981 3190 Replaced by 9511428 981 3190 Replaced By 9511428 can be connected to the adapter.
Disconnect the breakout box in reverse order.

Other information:
- Combined instrument panel Combined Instrument Panel
- Signal specification Signal Specification, Driver Information Module (DIM)
- For information about the fuses, see the relevant wiring diagram.