Connecting the Breakout Box, Climate Control Module (CCM)

Connecting the breakout box

Special tools:
951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin
981 3190 Replaced by 9511428 981 3190 Replaced By 9511428

General information
Check that the male and female terminals on the connectors are undamaged and secure (cannot be pressed in). Check that the cables to the female terminals are secured to the terminal pins.
The breakout box is designed to facilitate reading off the control module input and output signals when the control module is connected. The breakout box is designed to facilitate reading off the cable and component resistance when the control module is disconnected. The use of a breakout box reduces the risk of accidental short-circuited cables and damage to the connector pins.

Connecting the breakout box
- Ignition off
- Climate control module (CCM) Service and Repair
Connect breakout box 981 3190 Replaced by 9511428 981 3190 Replaced By 9511428 to the adapter.

Climate control module (CCM)
- Connect adapter 951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin to the control module connector A
- For connector A, terminals #A1-#A16 correspond to terminals #25-#40 on the breakout box.