Anti-Lock Brake System Module (ABS)

Anti-lock Brake System Module (ABS)

Removal

Note! Removal steps in this procedure may contain installation details.

Remove battery Refer to: Battery Removal and Replacement





Install the following items:
1. Torque: Anti-lock brakes, 14 Nm

2. Torque: Brake pipe M12 with wrench size 11mm, 14 Nm





Note! Make sure that the mating faces are clean and free of foreign material.

Torque: M5, 5 Nm

Remove hydraulic unit brake system Refer to: Hydraulic unit brake system, B5254T7 Service and Repair

Installation

To install, reverse the removal procedure.

Order and download appropriate software Programming and Relearning

Calibrate according to: VIDA/DIAGNOSTICS/VEHICLE COMMUNICATION/Advanced/BCM/Calibration(only vehicles with DSTC)