Bushing, Push Rod, Replacing

Bushing push rod

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the soundproofing panel. See: Instrument panel lower Instrument Panel Lower.

Removal

Removing the bushing




Break off the bushing together with the pin from the push rod.

Note! The pin cannot be separated entirely. It must be replaced with a new pin on installation.

Installation

Installing the bushing
Press in the bushing together with the pin into the push rod.

Note! The pin cannot be separated entirely. It must be replaced with a new pin on installation.