Connecting the Breakout Box, Power Seat Module Right (PSR)

Connecting the breakout box

Special tools:
951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable
981 3190 Replaced by 9511428 981 3190 Replaced By 9511428

Connecting the breakout box




- Ignition off
- Remove the fuse.
- Remove the side panel.
- Loosen the connector for the power seat module right (PSR).
Connect adapter 951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin to the control module's connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box and cable harness 951 1499 Cable 951 1499 Cable to the adapter. Alternatively, breakout box 981 3190 Replaced by 9511428 981 3190 Replaced By 9511428 can be connected to the adapter.
Disconnect the breakout box in reverse order.

Other information:
- Signal specification Signal Specification, Power Seat Module Right (PSR)
- Control module front seat Service and Repair
- For information on fuses, see the relevant wiring diagram.