Diagnostic Functions

Diagnostic functions

General
The Driver door module (DDM) and Passenger door module (PDM) have integrated diagnostics, Volvo Diagnostic, which continuously monitors itself as well as input and output signals.

Diagnostic trouble codes (DTCs)
A diagnostic trouble code (DTC) is stored if the control modules detect a fault. The Driver door module (DDM) and Passenger door module (PDM) can store up to 10 diagnostic trouble codes (DTCs) each.
If a fault disappears for any reason after the diagnostic trouble code (DTC) has been permanently stored in the control module, information about the fault remains in the control module.

Reading out and erasing diagnostic trouble codes
Stored diagnostic trouble codes (DTCs) can be read off and erased using this function.
Diagnostic trouble codes (DTCs) can only be erased once all the diagnostic trouble codes (DTCs) have been read off at least once.

Reading off parameter values
With this function, the values and status of parameters can be read from the driver door module (DDM) and passenger door module (PDM).
For more information on the different parameters, see Vehicle communication information under Specifications, other.

Activating components/functions
This function makes it possible to activate components/functions in the driver door module (DDM) and passenger door module (PDM).
For more information on activations, see Vehicle communication information under Specifications, other.

Reading off and programming data
With this option it is possible to read programmed data and to program in data.

Note! If the control module has been replaced, the position of the windows must be initiated using a diagnostic function. A window must be in its uppermost position before it can be initiated.

No customer related programming is available in the control module.

Reading off the control module identification
The control module can be identified by means of reading off a number of codes.
The codes contain information about the control module:
- hardware P/N (control module without software)
- P/N for the rear door control module
- hardware serial number (control module without software)
- serial number for the hardware for the rear door control module
- software P/N
- diagnostic software P/N.