Connecting the Breakout Box, Infotainment Control Module (ICM)

Connecting the breakout box

Special tools:
951 2901 DIM/ICM adapter 951 2901 DIM/ICM Adapter
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable
981 3190 Replaced by 9511428 981 3190 Replaced By 9511428

Connecting the breakout box




- Ignition off
- Remove the fuse
- Remove the infotainment control module (ICM)
- Disconnect the control module connector.
Connect adapter 951 2901 DIM/ICM adapter 951 2901 DIM/ICM Adapter to the control module connector. Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box and wiring 951 1499 Cable 951 1499 Cable to the adapter.
Alternatively, breakout box 981 3190 Replaced by 9511428 981 3190 Replaced By 9511428 can be connected to the adapter.
Disconnect the breakout box in reverse order.

Other information
- Signal specification Pinout Values and Diagnostic Parameters
- For information about the fuses, see the relevant wiring diagram
- Information and Entertainment Display Service and Repair