Description of Parameters

Description of parameters

Parameters, status

Signal source
The Remote Digital Audio Receiver (RDAR) can receive and decode a signal from either satellites, ground antennas or both. The control module selects the source whose signal is the strongest.
The following variations of detected sources are possible:
No signal = No signal detected.
SAT1 = Signal from satellite 1 detected.
SAT2 = Signal from satellite 2 detected.
ground transmission = Signal from ground antennas detected.
SAT1 & SAT2 = Signals from satellite 1 and 2 detected.
SAT1 & ground transmission = Signals from satellite 1 and ground antennas detected.
SAT2 & ground transmission = Signals from satellite 2 and ground antennas detected.
All = Signals from all sources detected.

Signal strength

Note! The parameter is extremely sensitive to interruptions.

Following responses are possible:
Excellent signal.
Good signal.
Poor signal.