Navigation Function Selector Switch: Service and Repair

Navigation Control Assembly

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.

Removal

Removing the airbag
Remove the drivers airbag (SRS). See Driver's airbag Driver's Airbag.

Removing the keypad




Remove the keypad. Use a weatherstrip tool.

Removing the switch RTI





Remove:
- the screw
- the connector
- the switch.

Installation

Installing the switch RTI

Install:
- the switch
- the screw
- the connector.

Installing keypad
Install the keypad.

Installing the airbag
Install the drivers airbag (SRS). See Driver's airbag Driver's Airbag.

Finishing

Function test
Test the function.