Checking AUX-Panel

Checking AUX-panel

Checking AUX-panel
Remove the equipment that is connected to the AUX-panel.
Connect special tool to the AUX-panel.
951 2989 Aux plug 951 2989 Aux Plug
Click the VCT2000 symbol to begin.

Checking for the fault
If possible, check if the customer's symptom remains.

Checking the wiring
Check the cables for short-circuit to voltage, short-circuit to ground and open circuit. For further information, see the wiring diagram.
If no malfunction is found, replace the AUX-panel.

Other information
- Checking wiring and terminals Checking Wiring and Terminals









Was a fault detected?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking AUX-panel

-------------------------------------------------