Phone Module (PHM)

Operation number: 39405-2

Phone Module (PHM)

Removal

Note! Removal steps in this procedure may contain installation details.





Remove glove compartment Refer to: Glove compartment Glove Compartment





Caution! Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Note! Make sure that the component terminals are not bent or damaged.

Note! Make sure that the optical connectors are clean and free of foreign material.

Vehicles with Bluetooth




Torque: M6, 10 Nm





Note! Make sure that the component terminals are not bent or damaged.





Caution! Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Note! Make sure that the component terminals are not bent or damaged.

Note! Make sure that the optical connectors are clean and free of foreign material.





All vehicles

Installation

To install, reverse the removal procedure.

Order and download appropriate software Programming and Relearning

Vehicles with Volvo On Call

Order and download appropriate software Programming and Relearning

Perform Volvo on call, activation Refer to: Volvo On Call, activation Volvo on Call, Activation

Perform Volvo on call, reactivation Refer to: Volvo On Call, re-activation Volvo on Call, Re-Activation

Perform Volvo on call, deactivation (cancellation) Refer to: Volvo On Call, deactivation (canceling) Volvo on Call, Deactivation (Canceling)

Vehicles with After Theft System for Vehicle Recovery (ATSVR)

Order and download appropriate software Programming and Relearning