Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SWM-E010

Condition




The diagnostic trouble code (DTC) is stored if the steering wheel module (SWM) registers that the voltage between the central electronic module (CEM) and the steering wheel module (SWM) differs by more than 2 V.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Internal fault in the steering wheel module (SWM)
- Contact resistance oxidation in the connector for the steering wheel module (SWM).

Fault symptom[s]