Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSR-0048

Condition
The power seat module, right (PSR) checks the signal from the Hall sensor in the backrest. The diagnostic trouble code is generated if the power seat module, right (PSR) registers a signal that is too high.
The diagnostic trouble code can be diagnosed upon start-up of the control module.
Lock the vehicle with the remote control or with the key. Wait 1 minute. Change the key position from position 0 to II.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the cable.

Fault symptom[s]
- Degenerated seat function